Introduction
A boot jack is a handy tool used to remove boots without having to bend over. It’s perfect for anyone who wears boots regularly, especially those who work outside. Boot jacks can be made from a variety of materials, but wood is a popular choice due to its durability and natural beauty. In this article, we will share with you 10 easy woodworking plans for making your own boot jack that are perfect for beginners.
1. Basic Boot Jack
This basic boot jack is the perfect beginner woodworking project. It’s easy to make and requires few materials. All you need is a piece of wood, a saw, sandpaper, and some wood glue. Follow the instructions below to make your own.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Cut a notch in the center of one end of the wood, leaving about 1 inch on each side
- Sand the wood until it’s smooth
- Apply wood glue to the notched end of the wood and the underside of the side pieces
- Attach the side pieces to the notched end and clamp them in place until the glue dries
2. Notched Boot Jack
This notched boot jack is a simple variation on the basic boot jack. The notch makes it easier to remove boots by providing a better grip. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Measure and mark the center of the wood on both ends
- Measure and mark 1 inch in from both sides of the wood on one end
- Connect the marks on the sides to the center mark using a straight edge
- Saw along the lines to create a notch
- Sand the wood until it’s smooth
3. Curved Boot Jack
This curved boot jack is a little more challenging than the previous two, but it’s still a great beginner woodworking project. The curved design adds a touch of elegance to the standard boot jack. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Measure and mark the center of the wood on both ends
- Measure and mark 1 inch in from both sides of the wood on one end
- Draw a curve from the side marks to the center mark using a compass
- Saw along the lines to create the curved shape
- Sand the wood until it’s smooth
4. Double Boot Jack
This double boot jack allows you to remove both boots at once, making it perfect for families or couples. It’s slightly more complex than the previous designs, but it’s still a great beginner woodworking project. Here’s how to make it.
- Cut two pieces of wood that are 14 inches long and 5 inches wide
- Measure and mark the center of both pieces of wood on both ends
- Measure and mark 1 inch in from both sides of one end of each piece
- Connect the marks on the sides to the center mark using a straight edge
- Saw along the lines to create two notched pieces
- Sand the wood until it’s smooth
- Apply wood glue to the notched end of each piece and clamp them together until the glue dries
5. Decorative Boot Jack
This decorative boot jack adds a touch of personality to a simple design. You can add any decorative elements you like, such as carving, wood burning, or painting. Here’s how to make it.
- Choose a piece of wood that has an interesting grain pattern or color
- Sketch your design onto the wood with a pencil
- Use a carving tool, wood burning tool, or paint to create your design
- Sand the wood until it’s smooth
6. Boot Jack with Handle
This boot jack with a handle makes it easy to carry with you wherever you go. It’s perfect for anyone who needs to remove their boots frequently while on the job. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Cut a notch in the center of one end of the wood
- Attach a handle to the other end of the wood using wood glue and screws
- Sand the wood until it’s smooth
7. Small Boot Jack
This small boot jack is perfect for anyone with limited storage space. It’s also great for children who need a smaller size to remove their boots. Here’s how to make it.
- Cut a piece of wood that is 10 inches long and 4 inches wide
- Cut a notch in the center of one end of the wood
- Sand the wood until it’s smooth
8. Angled Boot Jack
This angled boot jack is great for removing boots while standing up. The angled design puts less strain on your back and makes it easier to remove boots. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Cut a notch in the center of one end of the wood
- Measure and mark the center of the wood on both sides
- Measure and mark 1 inch in from both sides of the wood on one end
- Connect the marks on the sides to the center mark using a straight edge
- Saw along the lines to create an angled shape
- Sand the wood until it’s smooth
9. Boot Jack with Rubber Grips
This boot jack with rubber grips is perfect for anyone who needs a little extra help removing their boots. The rubber grips provide traction and prevent slipping. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Cut a notch in the center of one end of the wood
- Cut two pieces of rubber grip that are the same length as the notch
- Glue the rubber grips to the notch using contact cement
- Sand the wood until it’s smooth
10. Boot Jack with Built-In Scraper
This boot jack with a built-in scraper is perfect for anyone who works in muddy or dirty conditions. The scraper removes dirt and mud from your boots, making it easier to remove them. Here’s how to make it.
- Cut a piece of wood that is 14 inches long and 5 inches wide
- Cut a notch in the center of one end of the wood
- Attach a metal scraper to the underside of the notch using screws
- Sand the wood until it’s smooth
Conclusion
We hope these woodworking plans for making your own boot jack have inspired you to get started on your own project. Whether you’re a beginner or an experienced woodworker, there’s a boot jack design here for you. Remember to always use caution when using power tools and to wear appropriate safety gear.