Rough Cut with Fine Woodworking
Rough Cut with Fine Woodworking is a woodworking television show that provides viewers with an inside look at the world of woodworking. The show is hosted by Tom McLaughlin, a master craftsman with over 30 years of experience in the field.
Each episode of Rough Cut with Fine Woodworking features a different project that Tom McLaughlin works on in his shop. The projects range from simple to complex, and Tom walks viewers through every step of the process.
Season 8 Episode 4
Season 8 Episode 4 of Rough Cut with Fine Woodworking is titled “Shaker-Inspired Nightstand.” In this episode, Tom McLaughlin teaches viewers how to build a nightstand inspired by the Shaker style.
If you are a beginner woodworker, this episode is a great place to start. Tom McLaughlin breaks down every step of the process, making it easy to follow along and understand.
Tools and Materials Needed
- Table saw
- Router table
- Chisels
- Hand plane
- Sanding block
- Tape measure
- Wood glue
- Clamps
- Maple wood
- Poplar wood
- Danish oil
Step-by-Step Guide
Here is a step-by-step guide to building the Shaker-Inspired Nightstand featured in Season 8 Episode 4 of Rough Cut with Fine Woodworking:
Step 1: Cut the Legs
Using a table saw, cut four legs out of maple wood. Each leg should be 25 ¼ inches long and 1 ¾ inches square.
Step 2: Cut the Rails and Stiles
Cut the rails and stiles for the nightstand using a table saw. For the rails, you will need two pieces of maple wood that are 19 inches long and 2 inches wide. For the stiles, you will need two pieces of maple wood that are 24 inches long and 2 inches wide.
Step 3: Make the Mortise and Tenon Joints
Using a router table, make mortise and tenon joints in the legs. The tenons should be 1 ½ inches long and ¾ inches wide. The mortises should be 1 ½ inches deep and ¾ inches wide.
Step 4: Assemble the Nightstand
Using wood glue and clamps, assemble the nightstand. Fit the rails and stiles into the mortise and tenon joints on the legs. Once the glue has dried, sand the nightstand smooth.
Step 5: Apply the Finish
Apply a coat of Danish oil to the nightstand using a brush. This will give the nightstand a protective finish and bring out the natural beauty of the wood.
Conclusion
Rough Cut with Fine Woodworking Season 8 Episode 4 is a great resource for beginner woodworkers who want to learn how to build a nightstand inspired by the Shaker style. By following the step-by-step guide outlined in this blog post, you can build your own nightstand and learn valuable woodworking skills in the process.